Wi-Tek outdoor IoT enclosure for outdoor equipment protection
1 door and 1 lock hole
4 removable side plates, 2 for each side panel
4 M25 watertight connectors, 2 on each inner side panel
2 aluminum alloy rear rails
1 bottom cable entry
4 bottom drainage holes lockable with rubber plugs
1 fan on top inner panel
1 microswitch on the upper right inner side panel
3 insect screens
2 DIN rails 180 mm
188 x 42 x 120 mm mounting plate optional

Slim, Space-saving Enclosure with Only 170 mm (6.7 in.) Depth, Ideal for AV, Multimedia and Surveillance Applications, Assembled, Black RAL 7021

This 15U network cabinet is designed for those requiring maximum accessibility and flexibility in wall-mounted installations. The cabinet consists of two sections: the main compartment and a hinged back panel.

The dual section allows for efficient operation in technical rooms or network environments where flexibility is important. Cable entries at the top and bottom allow for neat cabling routing, while vents provide passive cooling for your equipment.

With a depth of 600 mm, this cabinet offers ample space for larger network components such as switches, routers, and patch panels.

⦁ Height: 15U rack capacity
⦁ Depth: 600 mm
⦁ Double section: Rotating rear frame with locking mechanism
⦁ Width: Suitable for standard 19-inch equipment
⦁ Construction: Black powder-coated steel
⦁ Front: Glass door, lockable and reversible
⦁ Side panels: Lockable and removable
⦁ Cable entry: Top and bottom
⦁ Ventilation: Passive airflow through the side panels
⦁ Color: Black (RAL9005)
⦁ Mounting: Wall-mounted

Ideal for all 19" applications
Maximum load capacity: 60 kg
Safety glass door opens more than 180°
1.2 mm thick galvanized and cold-rolled SPCC steel frame
Anti-static powder coating on all sides
Easy-to-remove side panels

ROLINE 10 inch wall-mounted enclosure 6 U 312x300 WxD black
Whether in the home, in the office or in sub-distribution boards with limited space - with the compact 10" solutions, you can install your network wherever you need it. The wall-mounted enclosures, which are available in three different height units (6U, 9U, 12U), have a full glass door and a cable entry with brushes in the roof and base. Inside, a pair of galvanised 10" profile rails with readable height units are installed, which can be adjusted in depth. Each enclosure consists of a robust steel construction made of up to 1.5 mm thick sheet steel and is electrostatically powder-coated in the standard colours grey (RAL 7035) and black (RAL 9005). It is possible to change the door hinge. In addition, the cabinets can be completely dismantled if required thanks to their demountable design.

Ideal for all 19" applications
Maximum load capacity: 60 kg
Safety glass door opens more than 180°
1.2 mm thick galvanized and cold-rolled SPCC steel frame
Anti-static powder coating on all sides
Easy-to-remove side panels

Intellinet wall-mounted distribution cabinets offer flexible and comprehensive solutions for network installations.
Removable side panels, a lockable safety glass door that opens 180°, and an optional swing-out frame facilitate cabling and component replacement.

⦁ 4 mm thick safety glass door
⦁ Swing-out frame for easy access to the rear of the cabinet
⦁ 1.5 mm thick galvanized and cold-rolled SPCC steel frame

⦁ Product type: 19" wall-mounted enclosure
⦁ Dimensions: (W x H x D) 540 x 593 x 600 mm
⦁ Color: Black, Gray
⦁ Depth: 600 mm
⦁ Height: 593 mm
⦁ Width: 540 mm
⦁ Height units: 12 HU
⦁ Material: Safety glass
Steel
⦁ Weight: 26 kg

ROLINE 19 inch wall-mounted housing Pro 20 U 600x450 WxD black
The wall-mounted enclosures in the ROLINE Pro series have been specially designed for flexible network cabling. Each enclosure has a slide-on cable inlet in the roof with a foam rubber seal. The rear panel and the base plate are equipped with punched cable inlets and plastic covers. The roof chassis has a punched-out area to accommodate a fan module. Inside, two pairs of galvanised profile rails with height units of 483 mm (19") are installed, which are also adjustable in depth. The robust steel constructions of the cabinets are made of up to 1.5 mm thick sheet steel and are available powder-coated in grey (RAL 7035) or black (RAL 9005). The side panels and front door are modular, lockable and removable, which improves accessibility. Wall mounting is carried out in two simple steps: Firstly, the rear panel is screwed to the wall and then connected to the housing. Optional levelling feet or castors can be used to make the enclosures free-standing.

Ideal for all 19" applications
Maximum load capacity: 60 kg
Safety glass door opens more than 180°
1.2 mm thick galvanized and cold-rolled SPCC steel frame
Anti-static powder coating on all sides
Easy-to-remove side panels

Product dimensions: 515 x 150-350 x 108 mm
19" wall-mounted rack brackets with adjustable depth.
Suitable for use in all types of environments, but specifically designed for installing cabling and small LAN equipment, as well as housing surveillance and audiovisual equipment. Its foldable design makes it highly portable.