Slim, Space-saving Enclosure with Only 170 mm (6.7 in.) Depth, Ideal for AV, Multimedia and Surveillance Applications, Assembled, Black RAL 7021

This 15U network cabinet is designed for those requiring maximum accessibility and flexibility in wall-mounted installations. The cabinet consists of two sections: the main compartment and a hinged back panel.

The dual section allows for efficient operation in technical rooms or network environments where flexibility is important. Cable entries at the top and bottom allow for neat cabling routing, while vents provide passive cooling for your equipment.

With a depth of 600 mm, this cabinet offers ample space for larger network components such as switches, routers, and patch panels.

⦁ Height: 15U rack capacity
⦁ Depth: 600 mm
⦁ Double section: Rotating rear frame with locking mechanism
⦁ Width: Suitable for standard 19-inch equipment
⦁ Construction: Black powder-coated steel
⦁ Front: Glass door, lockable and reversible
⦁ Side panels: Lockable and removable
⦁ Cable entry: Top and bottom
⦁ Ventilation: Passive airflow through the side panels
⦁ Color: Black (RAL9005)
⦁ Mounting: Wall-mounted

Ideal for all 19" applications
Maximum load capacity: 60 kg
Safety glass door opens more than 180°
1.2 mm thick galvanized and cold-rolled SPCC steel frame
Anti-static powder coating on all sides
Easy-to-remove side panels

ROLINE 10 inch wall-mounted enclosure 6 U 312x300 WxD black
Whether in the home, in the office or in sub-distribution boards with limited space - with the compact 10" solutions, you can install your network wherever you need it. The wall-mounted enclosures, which are available in three different height units (6U, 9U, 12U), have a full glass door and a cable entry with brushes in the roof and base. Inside, a pair of galvanised 10" profile rails with readable height units are installed, which can be adjusted in depth. Each enclosure consists of a robust steel construction made of up to 1.5 mm thick sheet steel and is electrostatically powder-coated in the standard colours grey (RAL 7035) and black (RAL 9005). It is possible to change the door hinge. In addition, the cabinets can be completely dismantled if required thanks to their demountable design.

Ideal for all 19" applications
Maximum load capacity: 60 kg
Safety glass door opens more than 180°
1.2 mm thick galvanized and cold-rolled SPCC steel frame
Anti-static powder coating on all sides
Easy-to-remove side panels

For 6/8-pole crimping modular plugs (RJ-11, RJ-12, RJ-45)
Suitable for cutting, insulation removal (ribbon cable) and crimping
Fitted with a forced lock with unlocking capability
Universally usable
Robust metal flip flops

This cable detection and testing device, consisting of a tone generator and a probe (cable detector), is a very practical aid for cable installation and troubleshooting.
The probe tests for continuity and assignment or determines line polarity and voltage for network / telephone cables.
The Tone Generator sends a signal to the connected line, the probe searches for the corresponding line at the other end; indication both by LED and acoustically.
The probe (cable locator) has a special inductive plastic tip to prevent unintentional short circuits in the vicinity of high voltage equipment
The Tone Generator can send single tone and multiple tone signals
Battery for the cable detector: 1x 9V block (6LR61 / AM-6)
Battery for the tone generator: 1x 9V block (6LR61 / AM-6)
Contents: Tone Generator, sample, bag, operating instructions

Continuity testing of coax cables with BNC connectors and 8-pole data lines w. fitted RJ-45 connectors
The device recognizes open and short-circuited (wire/wire or wire/shield) connections
A two-line display (LEDs) indicates sequentially which pin of the RJ-45 connector at cable end A is connected with which pin at cable end B and manual or automatic switch advancing is possible; in the case of a short-circuit more than two LEDs light up simultaneously
The device has 2 RJ-45 sockets; with the supplied Remote Kit cables laid in the wall can also be tested
Two adapter cables (BNC/RJ-45) are supplied for testing coax cables
PoE check - the PoE Finder allows the newtork administrator to find out if a network cable is supplied via PoE. Just plug in the network cable that has to be tested. The LED of the PoE finder will shine if the cable is supplied with power.
Battery (not included in delivery): 1x E-block 9V (6LR61/AM-6)

The tester can check UTP and STP (e.g. Cat.5e, Cat.6/6a...) and coaxial cables
It can identify and locate the distance to an open or short circuit
Uses TDR (Time Domain Reflectometer) to measure the length and distance to the defective of a cable
Identification of wiring and pin assignment
LCD backlight display

Manufacturer: VALUE
Product Group: Tester
Product Type: Cable Tester
Color: Multicolor
Accessories: Required Battery/Rechargeable Battery: 9V Block Battery, 1x
Height: 104 mm
Width: 78 mm
Depth: 33 mm
Weight: 202.1 g
Package Height: 60 mm
Package Width: 190 mm
Package Depth: 260 mm
Package Weight: 0.28 kg
Gross Weight: 0.28 kg
Current Catalog Edition: 20
Current Catalog Page: 12.002